Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!

Sitemap      |      contact us      |    Online message    |       CN

Telephone

+8615158121839
News Center

News Center

news center

News

Telephone

+8615158121839
>
>
Common faults and solutions of Dankai PFA tube extruder

Information details

Common faults and solutions of Dankai PFA tube extruder

  • Categories:News
  • Author:PFA tube lady
  • Origin:DANKAI
  • Time of issue:2005-11-05 11:52
  • Views:

Common faults and solutions of Dankai PFA tube extruder

  • Categories:News
  • Author:PFA tube lady
  • Origin:DANKAI
  • Time of issue:2005-11-05 11:52
  • Views:

Because the PFA tube extruder is made of metal materials with high hardness, it will suffer from vibration, impact and other interaction forces in the whole process of production operation, which will cause the gap between the parts and cause wear. Traditional repair methods include surfacing, hot spray, brush, etc., but there are some disadvantages: surfacing will cause the surface of parts to achieve high temperature, resulting in deformation or cracking of parts, and then harm the dimensional accuracy and all normal application. In more severe cases, it can also cause bone fractures; Although the brush cross has no thermal hazard, but the thickness of the cross layer can not be too thick, pollution is more serious, and greatly limited the application.

At present, most of the western countries choose the way of polymer composite materials to deal with the problem, the more mature application is the technical system of Zhaohua. Its comprehensive performance and ready-to-process characteristics allow for the requirements and accuracy of repair applications, and also reduce the impact and vibration of the equipment during the whole operation process, and increase the service life. Because the material is variable, when the material is impacted by external force, the material will deform and absorb external force with the expansion and contraction of the bearing or other parts, and always keep close coordination with the bearing. Reduce the likelihood of wear and tear.

In the process of pre-screwing the single screw extruder bolt of PFA tube, the bolt is deformed due to the tensile stress, and its recovery stress makes it closely connected with the connected seal, so that with the passage of time, it is lengthened and local tensile. The extension deformation becomes long-term deformation, the recovery stress decreases, resulting in stress relaxation and torque reduction, so that the bolt loosens, the thread slips and wears, and even the internal thread of the fastener is damaged in serious cases.

For more information about PFA tube extruder, please continue to pay attention to Shenzhen Dankai Technology Co., LTD.

ShenZhen DanKai Technology Co.,ltd. is an intelligent manufacturing enterprise specializing in the R & D, production, sales and service of FEP, PFA, PTFE,PVDF and other fluoroplastic tube, bar, sheet and film products as well as other insulating materials.

The company has a senior research and development team of international standards and imported fluorine plastic products production line, some fluorine plastic products passed ISO9001, SGS, FDA certification.

The main products are: ① pipe: PTFE polytetrafluoroethylene pipe, FEP pipe, PFA pipe, PVDF pipe; ② Heat-shrinkable tubes: PTFE heat-shrinkable tubes, FEP heat-shrinkable tubes, PFA heat-shrinkable tubes, PVDF heat-shrinkable tubes; ③ Plate and rod films: PTFE plate and rod film, FEP plate and rod film, PFA plate and rod film, PVDF plate and rod film; ④ Insulating materials: silica gel, PE, PVC, UPE, etc.; ⑤ Special class: PFA inlet joint, spiral pipe, spring pipe, rotary cut pipe, welding rod, tee, straight, gasket, joint, taper rod, flaring pipe, sealing pipe, braided pipe, corrugated pipe, etc. At the same time can be customized processing production of various specifications of fluorine plastic products.

This article by the teflon tube little sister original, welcome to pay attention to, take you together long knowledge!

Keyword:

More news

Landline: 0755-29979617
Cell phone: 15818669373

img
Add WeChat, free sample

img
Follow the corporate public account

Shenzhen Dankai Technology Co., Ltd.

Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617  23127719  23127819
Fax: 86-0755-29979492

QR code

Follow us

Page copyright©1998-2024  Shenzhen Dan Kai Technology Co., Ltd. Guangdong