Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!
Sitemap | contact us | Online message | CN
Telephone：
+8615158121839
Hot key words：Polyperfluoroethylene propylene(FEP/F46) PTFE Teflon series PFA PVDF
News
Telephone：
+8615158121839Information details
Simple analysis of the common problems of PFA tube extruder
- Categories:News
- Author:PFA tube lady
- Origin:DANKAI
- Time of issue:2006-03-22 14:19
- Views:
Simple analysis of the common problems of PFA tube extruder
- Categories:News
- Author:PFA tube lady
- Origin:DANKAI
- Time of issue:2006-03-22 14:19
- Views:
1. The screw is not working properly.
Reason: the hopper feed is not continuous; The feed port is blocked or bridged with foreign matter; Hard metal objects fall into the thread, blocking the thread, unable to feed normally.
Treatment methods: to accelerate the feed rate of PFA extruder and maintain the feed stability; Remove foreign matter from inlet and remove bridge phenomenon; Make sure that the metal foreign body falls into the spiral groove, stop the machine immediately to remove the spiral and remove the metal foreign body.
2. The vent is blocked.
Cause: Due to the unstable screw extrusion, the plasticization temperature is not enough, and there are a lot of impurities in the PFA raw material, resulting in the PFA tube extruder feed too fast.
Treatment method: clean or replace the filter before PFA feeding; Reduce the feed rate to make the plasticizing stabilized screw stable extrusion; Increase the plasticizing temperature of PFA extruder.
3. The host does not rotate or stops instantaneously.
Cause: PFA tube extruder main motor power supply is not connected; Insufficient heating time, or one of the heaters does not work, resulting in excessive motor torque, overload.
Treatment method: Check whether the main circuit of PFA pipeline extruder is through. Check the temperature display of each part, determine the machine preheating time, check whether the heater is damaged or bad contact.
For more information about PFA tube extruder, please continue to pay attention to Shenzhen Dankai Technology Co., LTD.
ShenZhen DanKai Technology Co.,ltd. is an intelligent manufacturing enterprise specializing in the R & D, production, sales and service of FEP, PFA, PTFE,PVDF and other fluoroplastic tube, bar, sheet and film products as well as other insulating materials.
The company has a senior research and development team of international standards and imported fluorine plastic products production line, some fluorine plastic products passed ISO9001, SGS, FDA certification.
The main products are: ① pipe: PTFE polytetrafluoroethylene pipe, FEP pipe, PFA pipe, PVDF pipe; ② Heat-shrinkable tubes: PTFE heat-shrinkable tubes, FEP heat-shrinkable tubes, PFA heat-shrinkable tubes, PVDF heat-shrinkable tubes; ③ Plate and rod films: PTFE plate and rod film, FEP plate and rod film, PFA plate and rod film, PVDF plate and rod film; ④ Insulating materials: silica gel, PE, PVC, UPE, etc.; ⑤ Special class: PFA inlet joint, spiral pipe, spring pipe, rotary cut pipe, welding rod, tee, straight, gasket, joint, taper rod, flaring pipe, sealing pipe, braided pipe, corrugated pipe, etc. At the same time can be customized processing production of various specifications of fluorine plastic products.
This article by the teflon tube little sister original, welcome to pay attention to, take you together long knowledge!
More news
Landline： 0755-29979617
Cell phone： 15818669373
Add WeChat, free sample
Follow the corporate public account
Shenzhen Dankai Technology Co., Ltd.
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617 23127719 23127819
Fax: 86-0755-29979492
Follow us
Page copyright©1998-2024 Shenzhen Dan Kai Technology Co., Ltd. Guangdong