Welcome to the official website of Shenzhen Dankai Technology Co., Ltd.!
Sitemap | contact us | Online message | CN
Telephone：
+8615158121839
Hot key words：Polyperfluoroethylene propylene(FEP/F46) PTFE Teflon series PFA PVDF
News
Telephone：
+8615158121839Information details
Teflon heating tube 2.0
- Categories:Industry news
- Author:FEP tube lady
- Origin:FEP tube lady
- Time of issue:2007-07-07 15:21
- Views:
Teflon heating tube 2.0
- Categories:Industry news
- Author:FEP tube lady
- Origin:FEP tube lady
- Time of issue:2007-07-07 15:21
- Views:
1. Teflon electric heating tube
The commonly used Teflon electric heating tube is a new type of strong corrosion-resistant electric heater made of PTFE sleeve, which is used for heating various corrosive liquids. It has excellent aging resistance and good bending performance, and adopts a low surface load design. There are two types of Teflon electric heating tubes. One is to spray the surface of the heating tube directly with fluoroplastic material, and the other is to cover the outer layer of the iron heating tube and the copper heating tube with a fluoroplastic sleeve.
Pay attention to the following when using Teflon heating tube:
1. To prevent the heated liquid from being too viscous, solid substances sticking to the surface of the pipe and burning out the Teflon
2. It is recommended to add a temperature control protector to prevent the temperature from exceeding 110 degrees and burning the pipe
3. Avoid disassembling the joint part voluntarily to prevent the penetration of acid
4. It is best to control the power requirement below 1.5w/c㎡. The maximum should not exceed 2W/c㎡.
Teflon heating tubes are electroplating, electrolysis, degreasing, pickling, electroless nickel and phosphorus plating, hydrofluoric acid, anodizing, aluminum plating, smelting, chemical, pharmaceutical, food and other corrosive liquid heating, condensation, evaporation, The best heater choice for concentration and more!
Picture 1: Teflon heating tube source: Shenzhen Dankai
Performance of Teflon heating tube:
1. Non-sticky: Teflon is inert, almost all materials are not bonded with Teflon, and the thin film also shows non-stick performance.
2. Heat and cold resistance: Teflon has excellent heat and low temperature resistance. In a short time, it can withstand temperature to 300℃, melting point is 327℃, and it will not melt at 380℃. Generally, it can be used continuously between 240℃ and 260℃. It has remarkable thermal stability. It can work at freezing temperature. No embrittlement, cold resistance to 190℃.
3. Lubricity: Teflon has a low coefficient of friction. The friction coefficient changes when the load is sliding, but the value is only between 0.04-0.15.
4. Non-hygroscopicity: The surface of Teflon does not stick to water and oil, and it is not easy to stick to the solution during the production operation. If there is a small amount of dirt, it can be removed by simply wiping. Short downtime, saving working hours and improving work efficiency.
5. Corrosion resistance: Teflon is hardly corroded by chemicals, and can withstand all strong acids (including aqua regia), strong alkalis, and strong acids except molten alkali metals, fluorinated media, and sodium hydroxide above 300°C. The role of oxidants, reducing agents and various organic solvents can protect parts from any kind of chemical corrosion.
6. Weather resistance: non-aging, the best non-aging life among plastics.
7. Non-toxic: In normal environment within 300℃, it is physiologically inert, non-toxic and can be used as medical and food equipment.
8. Insulation: Very good dielectric constant, high insulation.
2. Teflon square tube
Teflon square tube is a special tube made of polytetrafluoroethylene (PTEE, commonly known as Teflon, plastic king) material after extrusion and sintering, drying, high temperature sintering, and shaping.
Teflon is currently widely used in important technology industries such as machinery, electronic appliances, automobiles, aerospace, chemicals, computers, electric heating, military, and communications.
Features of Teflon square tube:
1. High chemical stability: can withstand all strong acids, including aqua regia, hydrofluoric acid, concentrated hydrochloric acid, nitric acid, fuming sulfuric acid, organic acids, etc., strong alkalis, strong oxidants, reducing agents and various organic solvents . It is very suitable for feeding high-purity chemicals.
2. Low friction coefficient: The friction coefficient is generally only 0.04, which is a very excellent self-lubricating material, and the friction coefficient does not change with temperature changes.
3. Excellent anti-sticking property, and the inner wall of the tube is not easy to adhere to colloids and chemicals.
Figure 2: Teflon square tube source: Shenzhen Dankai
4. Excellent aging resistance, can be used outdoors for a long time.
5. Excellent electrical insulation performance: PTFE is a highly non-polar material with good dielectric properties, extremely high electrical resistance, and a dielectric constant of about 2.0, which is small among all electrical insulation materials.
6. Part of the tube has high transparency, and the internal fluid condition can be easily observed.
Teflon square tube parameters:
1. Withstand voltage: 150V-600V
2. Working temperature: -80℃~260℃
3. Melting point: 327℃
4. Flame retardancy: VW-1
5. Breakdown strength: 26KV/mm
6. Color: milky white, transparent
Shenzhen DanKai Technology Co., Ltd. (ShenZhen DanKai Technology Co.,ltd.), whose predecessor was Dongguan Dandi Insulation Material Co., Ltd. Fluoroplastic Material Factory, which was established in 1998, specializes in FEP, PFA, PTFE and other fluoroplastic pipes. R&D, production and sales of rod, sheet and film products and other insulating materials. The company has a senior R&D team with international standards and a production line of fluorine plastic products imported from abroad. Some fluoroplastic products have passed ISO9001, SGS, FDA certification, and have been fully affirmed by domestic and foreign cooperative customers such as Huawei, Foxconn, Midea, ZTE, Intel, and AirTAC. The main products of the company are: ①Tubes: Ptfe tube, Fep tube, Pfa tube, Pvdf tube; ②Heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube; ③Plate rod Membrane: Ptfe board and rod film, Fep board and rod film, Pfa board and rod film, Pvdf board and rod film; ④Insulation materials: silica gel, PE, PVC, UPE, etc.; ⑤Special category: PFA imported connector, spiral tube, spring tube , Rotary cut tube, welding rod, tee, straight-through, gasket, joint, taper rod, flared tube, sealing tube, braided tube, bellows, etc. At the same time, fluorine plastic products of various specifications can be customized and processed according to customer requirements.
More news
Landline： 0755-29979617
Cell phone： 15818669373
Add WeChat, free sample
Follow the corporate public account
Shenzhen Dankai Technology Co., Ltd.
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen
Tel: 0755-29979617 23127719 23127819
Fax: 86-0755-29979492
Follow us
Page copyright©1998-2024 Shenzhen Dan Kai Technology Co., Ltd. Guangdong